Machine Tools

Applicable industry: Machine tools (Built-in bearing type) LX84M, 86M series

2 fluid type (Coolant and oil mist).
This rotary joint achieves longer lifetime because double drain structure prevents entering drain to bearing.

Applicable industry: Machine tools (Built-in bearing type) LX84V, 86V series

3 fluid type (Coolant, oil mist and dry air).
This rotary joint achieves longer lifetime because double drain structure prevents entering drain to bearing.

Applicable industry: Machine tools (Built-in bearing type) LX88 series (for hexagonal shaft)

3 fluid type (Coolant, oil mist and dry air).
Bore-mounted type.
Applicable for high pressure and high speed.

Applicable industry: Machine tools (Built-in bearing type) LX88 series (for octagonal shaft)

3 fluid type (Coolant, oil mist and dry air).
Bore-mounted type.
Applicable for high pressure and high speed.

Applicable industry: Machine tools (Bearing-less type) ESX20M-S&E series

2 fluid type (Coolant and oil mist).
Applicable for hollow motor and built-in spindle.

Applicable industry: Machine tools (Bearing-less type) ESX20M-13060, 61, 62

2 fluid type (Coolant and oil mist).
Easy install rotor.
Enables smooth movement of the stationary seal.
Superior sealing and durability performance.

Applicable industry: Machine tools (Bearing-less type) ESX20M-L series

2 fluid type (Coolant and oil mist).
Maximum stroke (axial movement) is 8 mm.
Seal type is "Heat shrink fit" that prevent seal separation by chemical influence of coolant.

Applicable industry: Machine tools (Bearing-less type) ESX20V-L series

3 fluid type (Coolant, oil mist and dry air).
Maximum stroke (axial movement) is 8 mm.
Seal type is "Heat shrink fit" that prevent seal separation by chemical influence of coolant.

Sludge adherence reduction type (Auto Flush)

The "Auto Flush" system developed by RIX reliably reduces "leakage" which has been a major problem with rotary joints for machine tools.

This system is a new technology that dramatically improves the biggest factor that causes leaks (opening/closing operation failure caused by sludge contained in coolant).

Applicable industry : Machine tools (Switching valve with ejector function) "Cln Vac"

・Suction of residual coolant inside the machining center spindle.
・Mist control inside the machining chamber.
・Reduction of air consumption during ATC.

For ball screw cooling (Bearing-less type) ES50 series

One rotary joint is able to supply and discharge coolant oil.
Easy to control heat generation and saving motor energy comparing with oil seal type.

For turning machine chuck (Built-in bearing type) LA1P series (Single port)

No oil air supply needed for dry air use because grease is enclosed at mechanical seal part.

For turning machine chuck (Built-in bearing type) EES-2P03 (Double ports)

No oil air supply needed for dry air use because grease is enclosed at mechanical seal part.

Applicable industry : Machine tools (for table cooling) Multi-port series

Suitable for various applications such as chucking, mating detection, air blow, and coolant-through.Supports high pressure and high-speed rotation.

Oil Skimmers

The screw type oil skimmers do not require an oil-water separate tank. It is compact, cuts running cost, and does not need any time-consuming tank cleaning.

FRICTTLE

A conventional lubricant forms an oil film to lubricate the sur face of metal.
FRICTTLE is a completely new lubricant because metal surface modification is also applied to lubricate the surface. FRICTTLE reduces friction overwhelmingly and remarkably prolongs the service life of metal components o wing to its incomparable lubricity.
Also, FRICTTLE can decrease noise by lowering friction-induced vibration.

Hardlock Nut (HLN)

Utilizing the wedge principle used in ancient Japanese architecture, the HLN is the ultimate self-locking nut which perfectly succeeds to integrate the nuts with the bolt.

Hardlock Bearing Nut (HLB)

The HARDLOCK Bearing Nut was developed with the same wedge design as HARDLOCK Nut and maintains an extremely effective self-locking effect. The HARDLOCK Bearing Nut's high self-locking effect allows it to maintain a complete tightened state even during high-speed rotation, vibration, forward and reverse rotation and impact. We promise a significant cost down since it is maintenance-free.

Hardlock Set Screw (HLS)

The HARDLOCK Set Screw is a revolutionary self-locking set screw (Hexagon socket head set screw) which applies the "wedge principle" and delivers superior self-locking effect like the other HARDLOCK products without any change in the current conditions of the application.

Vivid Screen

As "Vivid Screen" is featured by high performance on water & warm water repellent, by sticking this product on the visual window of machine tools & washing equipment, operators can visibly observe the running situation of machines.